Future implications of urban intensification on residential water demand

Over recent decades Auckland, New Zealand, metropolitan area has vastly expanded as a result of rapid population growth and low-density housing developments. In order to manage the uncontrolled low-density urban sprawl, Auckland Council proposed a compact city model through promoting higher density housing developments. In order to understand the implications of this transition on future residential water demand, this study first evaluated water consumption in three major housing types in Auckland including single houses, low-rise and high-rise apartments. Using the geographic information system, the water consumption information, estimated from a large sample of 60,000 dwellings across Auckland, was subsequently integrated with the Proposed Auckland Unitary Plan outlining the future housing composition over different areas in Auckland. Through developing different growth scenarios, the study showed that the housing transition from single houses to more intensified multi-unit houses cannot considerably affect the average per capita water consumption in Auckland.     

A spectrophotometric assay method for vanadium in biological and environmental samples using 2,4-dinitrophenylhydrazine with imipramine hydrochloride

A simple, rapid, and sensitive method involving the interaction of 2,4-dinitrophenylhydrazine with imipramine hydrochloride in presence of vanadium (V) in sulfuric acid medium has been proposed for the determination of vanadium. The purple-colored product developed showed an absorption maximum at 560 nm and was stable for 24 h. The working curve was linear over the concentration range of 0.1–2.8 μg ml^− 1, with sensitivity of detection of 0.0124 μg ml^− 1. Molar absorptivity and Sandell’s sensitivity were found to be 2.6 × 10⁴ l/mol cm and 0.0039 μg cm^− 1, respectively. The accuracy of the proposed method was assessed by Student’s t test and variance ratio F test, and the results were on par with the reported method. The method was successfully used in the determination of V in water, human urine, soil, and plant samples, and it was free from interference by various concomitant ions.     

Measurement of soil radioactivity levels and radiation hazard assessment in southern Rechna interfluvial region, Pakistan

Rechna interfluvial region is one of the main regions of Punjab, Pakistan. It is the area which is lying between River Ravi and River Chenab, alluvial-filled. Radioactivity levels in soil samples, collected from southern Rechna interfluvial region, Pakistan, have been estimated by using gamma-ray spectrometric technique. ²²⁶Ra, ²³²Th, the primordial radionuclide ⁴⁰K, and the artificial radionuclide ¹³⁷Cs have been measured in the soil of the study area. The mean radioactivity levels of ²²⁶Ra, ²³²Th, ⁴⁰K, and ¹³⁷Cs were found to be 50.6 ± 1.7, 62.3 ± 3.2, 662.2 ± 32.1, and 3.1 ± 0.3 Bq kg^???1, respectively. The mean radium equivalent activity (Ra_eq), outdoor radiation hazard index (H _out), indoor radiation hazard index (H _in), and terrestrial absorbed dose rate for the area under study were determined as 190.8 ± 8.7 Bq kg^???1, 0.52, 0.65, and 69.8 nGy h^???1, respectively. The annual effective dose to the general public was found to be 0.43 mSv. This value lies well below the limit of 1 mSv for general public as recommended by the International Commission on Radiological Protection. The measured values are comparable with other global radioactivity measurements and are found to be safe for the public and the environment.     

Conceptual framework for evaluation of ecotourism carrying capacity for sustainable development of Karkheh protected area,Iran

The maintenance of natural and virgin ecosystems against an unnecessary influx of humans requires a modern and efficient model such as the carrying capacity model to optimize the management and development of ecotourism in these areas. The model is one of the key tools for conservation and sustainability of these areas. The present research attempts to formulate a framework for the ecotourism carrying capacity model for sustainable development of Karkheh protected area in Iran. The information was collected using a citation method as well as, interviews with experts, and visitors, and director of the region with 24 key indicators being regulated by field surveys and library studies. In this study, the network analysis process model, the Pressure-State-Response conceptual model, and Arc GIS_10.5 software were used to determine the potential for the establishment of ecotourism performance in the scale of 1: 50,000. In this research, 70 questionnaires were completed by experts in the field of environment and ecotourism to determine the relative importance of effective pressures. According to the results, the highest values belonged to physical carrying capacity (13,425,681 persons per day), ecological carrying capacity (2,482,226 persons per day), and social and culture (985,706 people per day), respectively. Based on the regional carrying capacity, the physical, ecological, and social carrying capacity index was calculated as 3356, 621, and 246 (greater than one), respectively. According to the results, the region has a high carrying capacity, which can accept visitors.     

Design and optimization of a hybrid process based on hollow-fiber membrane/coagulation for wastewater treatment

Environmental Science and Pollution Research - Treatment of textile wastewater using ultrafiltration membranes was carried out in this study. Since membrane fouling is a major operational problem...     

Spatial Modeling of Mean Annual Temperature in Iran: Comparing Cokriging and Geographically Weighted Regression

Mapping spatial distribution of climatological parameters with a good degree of accuracy is crucial in environmental modeling and planning. Nowadays, there are various models to estimate and predict spatial variables in an area but some such as cokriging and geographically weighted regression (GWR) have got more attention from experts in this field. The objectives of this study are to evaluate and compare GWR with ordinary cokriging (OCK) techniques for estimating the mean annual air temperature (MAT) of Iran using European Centre for Medium-Range Weather Forecasts (ECMWF) data and auxiliary variables (e.g., longitude, latitude and altitude). The MAT-gridded data for Iran was collected in pixels during the time interval of 1987–2015 from the ERA-Interim re-analysis version of ECMWF. Validation results indicate that cokriging model with latitude and altitude for estimating MAT has the lowest MAE (0.0155), MBE (0.00085), RMSE (0.0251), and the highest NS (0.9999) in relation to other cokriging methods. On the other hand, GWR with altitude has better results than those of GWR with other auxiliary variables because of its MAE (0.1271), MBE (0.0124), RMSE (0.1760), and NS (0.9969). By comparing two mentioned methods, cokriging with latitude and altitude has provided the best performance in relation to GWR for prediction of MAT in Iran. To obtain accurate estimation of the spatial distribution of MAT, local residuals were analyzed. Results concluded that residuals of the OCK model have high spatial adaptations between the observed and predicted MAT data compared to the GWR model. Hence, OCK was a relatively optimum method for the estimation of MAT compared with GWR.

     

Environmental planning and management

Environmental Science and Pollution Research -     

Direct and indirect costs of nonfatal road traffic injuries in Iran: A population-based study

Objectives: The objective of this study was to assess the incidence rate as well as direct and indirect costs of nonfatal road traffic injuries (RTIs) in Iran in 2011.

Methods: Data from the 2011 national household survey were used. In this survey, data on demographics, history, and costs of injury were obtained in 2 steps: first, direct face-to-face interview and second, telephone calls. We estimated the incidence rate of nonfatal RTIs in this year. The direct costs included medical care as well as nonmedical costs paid by the patient or insurance services. The indirect costs were estimated by considering the cost of absence from work or education. We also used logistic regression analyses to investigate risk factors of nonfatal RTIs.

Results: We found 76 nonfatal RTI cases (0.96%) out of 7,886 whole reference study cases. These 76 injured patients had a history of RTI in the preceding 3 months. The annual incidence of RTIs was estimated at 3.84%. The mean age of RTI cases was 28.5 ± 10.6 and 88.16% of them were male. Male gender was a major risk factor (odds ratio [OR] = 9.64, 95% confidence interval [CI], 4.79–19.41) and marriage was a protective factor (OR = 0.44, 95% CI, 0.28–0.70) for RTI. The medians of direct, indirect, and total costs were US$214, US$163, and US$387, respectively. The total cost of nonfatal RTIs in Iran was estimated at 1.29% of the gross domestic product (GDP) in 2011.

Conclusions: In Iran, nonfatal RTIs imposed a total cost of almost US$7 billion to the country for one year. Extension and more serious implementation of preventive measurements seem necessary to decrease this notable burden of RTIs.     

Modeling and simulation of biogas-fueled power system

The main objective of this paper is to develop a complete model that fully simulate a biogas-fueled power plant which can be used to supply a rural farm with sufficient electricity. The reactor is fed with animal manure of the farm. The proposed model consists of three main parts; a biogas reactor, a microturbine (MT) coupled to a permanent magnet synchronous generator, and a storage system. The model describes the dynamics of an MT and it is suitable for both steady state and transient simulation and analysis. The volume of biogas output delivered from the Anaerobic Digester depends on the reactor volume, reactor temperature, and animal manure type. The storage system is used to store the excess value of biogas if any. It is composed of two parts: a comparator and a storage tank. The comparator compares the volume of biogas produced by the reactor with that needed to supply the load. An adaptive controller is developed to withstand the system against any transient condition such as suddenly load increase/decrease. The proposed model is implemented for chemical and physical behaviors of the biogas production process, as well as for different variables of MT-generator operations. The model is implemented in Matlab/Simulink environment and tested under different operating conditions in both steady state and transient status to study the impacts of different variables on the system output. The output results prove its applicability and effectiveness under different operating conditions.     

Conversion of Mixed Low-Density Polyethylene Wastes into Liquid Fuel by Novel CaO/SiO<Subscript>2</Subscript> Catalyst

Plastic wastes disposal can be done by various methods such as landfill, incineration, mechanical and chemical recycling but these are restricted due to some environmental, economic and political problems. Conversion of these plastic wastes into valuable products by degradation is the best option. In the present work waste low density polyethylene was degraded by catalytic process using CaO/SiO₂ as mixed catalyst. The conditions for catalytic degradation were optimized for the production of maximum liquid fuel. It was found that the yield of liquid product was up to 69.10 wt% at optimum condition of temperature (350 °C), time (90 min) and catalyst feed ratio (1:0.4). Liquid fuels obtained from the catalytic degradation were further separated into various fractions by fractional distillation. Composition of liquid fuels was analyzed by FTIR spectroscopy, which showed that the liquid fuels mostly consist of paraffinic and naphthenic hydrocarbons. Different fuel properties such as density, specific gravity, American petroleum institute gravity (API gravity), viscosity, kinematic viscosity, refractive index, refractive intercept and flash point of both the parents and various fractional fuels were determined. All the properties of the obtained fuels are in close agreement with the fuel properties of gasoline, kerosene and diesel. It was found that our catalyst is very much efficient in terms of time, degradation temperature and amount of catalyst.